5-11. MPEG-TS/UDP settings

  1. Click “Settings” on the top right of Dashboard.
    ub250_dashboard_add_network
  2. Select the channel you want to setup.
    ub250_select_channel
  3. Select [MPEG-TS/UDP] from the pulldown list of Broadcasting Services.
  4. If you want to change settings, click the [Edit] button.

Note

  • If a class D address is specified, it becomes multicast. Please use 239.0.0.0 ~ 239.255.255.255. The default address is as follows.
    • #0: 239.11.250.0
    • #1: 239.11.250.1
    • #2: 239.11.250.2
  • The default port number is “1234”.
  • TTL should be larger than the number of routers through which the multicast packet passes.
    (When distributing to a local network, TTL should normally be set to “1”.)
  • When viewing multicast video in VLC, please add “@” before the IP address in the URL.
    Ex: udp://@239.11.250.0:1234