2-1i. MPEG-TS/UDP (initial setup)

  1. Access http://shell.cerevo.com/login and sign in to Dashboard.
  2. Select “LiveShell X” from the device list.
    select_ub250
  3. Select [MPEG-TS/UDP] and click the [OK] button.
  4. Set the IP address, port number and TTL that MPEG-TS/UDP streaming will use.

    1. If you want to setup multiple broadcasting, select the checkbox.
    2. Set the other channel information and click the [OK] button.
      ub250_multiple_broadcasting_other_channel
  5.  Select an internet connection type and click the [OK] button.
    ub250_select_internet_connect_type
  6.  Proceed to step 2-2.

Note

  • If a class D address is specified, it becomes multicast. Please use 239.0.0.0 ~ 239.255.255.255. The default address is as follows.
    • #0: 239.11.250.0
    • #1: 239.11.250.1
    • #2: 239.11.250.2
  • The default port number is “1234”.
  • TTL should be larger than the number of routers through which the multicast packet passes.
    (When distributing to a local network, TTL should normally be set to “1”.)
  • When viewing multicast video in VLC, please add “@” before the IP address in the URL.
    Ex: udp://@239.11.250.0:1234