In the event of errors or other problems you can force shutdown LiveShell X with the following instructions.
- Press and hold the upper left side and the lower right buttons at the same time for 5 seconds.
- The LiveShell X is now turned off.
- 1. Before Using the LiveShell X
- 2. Initial Set Up
- 2-1a. Ustream (initial setup)
- 2-1b. Niconico Live (initial setup)
- 2-1c. Other broadcasting services (RTMP, YouTube Stream now, initial setup)
- 2-1d. RTSP server (initial setup)
- 2-1e. YouTube Live for live events (initial setup)
- 2-1f. Facebook Live (initial setup)
- 2-1g. Twitch (initial setup)
- 2-1h. Recording
- 2-1i. MPEG-TS/UDP (initial setup)
- 2-2. Cable connection and power on
- 2-3a. Ethernet setup
- 2-3b. Wi-Fi set up
- 2-4. Local Mode
- 3.Display
- 4.Operation
- 5.Settings
- 5-1. Add network
- 5-2. Dashboard user account settings
- 5-3. Add or re-register a new LiveShell
- 5-4-1. Ustream account settings
- 5-4-2. Ustream channel settings
- 5-5. Niconico live settings
- 5-6. Other broadcasting service settings
- 5-7. RTSP server settings
- 5-8. YouTube Live settings
- 5-9. Twitch settings
- 5-10. Recording
- 5-11. MPEG-TS/UDP settings
- 5.12. Difference in configurable items for each channel
- 5.13. Timecode Settings
- 6. Firmware Update
- 7. Reset/Initialize
- 8. FAQ
