6. Firmware Update

How to update using device buttons

  1. Make sure you are offline.
  2. Connect the AC adapter to the LiveShell PRO.
  3. Start live streaming so the device LCD changes to “Online”.
  4. Press the top left device button and select “Power-Off.”
  5. If a newer firmware has been released, your LiveShell PRO will automatically update the firmware.
    Note: Do not unplug the AC adapter or remove the batteries while the firmware is being updated.

How to update using Dashboard

    1. Connect the AC adapter to the LiveShell PRO.
    2. Open Dashboard.
    3. If there is a new firmware update,  an update notice will be displayed.

  1. Click “Update now.”

  1. Read the update warnings and click “Update.”

  1. Your LiveShell will begin to automatically update the firmware and will reboot.
    Note: Do not unplug the AC adapter or remove the batteries while the firmware is being updated.
  2. The status after rebooting is set by “After Online” settings. (The default is ” Auto Broadcast “)

Release Notes

Firmware Rev.3871(2017.09.01)

Main Improvements

  • Fixed the problem that the AXIS IP camera compatibility function did not work.
  • Fixed the problem that left and right channels of MIC-IN were reversed.
  • Fixed the problem that LiveShell PRO could not receive RTMP Acknowledgment Message and streaming distribution, for example to Wowza Streaming Engine, stops.
Firmware Rev.3841(2016.12.02)

Main Improvements

  • Fixed issue where the alert message,”Please use a keyframe frequency of four seconds or less”, is shown in the YouTube Live control room even if required frequency is already set.
  • Fixed the problem that LiveShell PRO hangs while stopping live stream when the device displays “Synchronizing Dashboard” or error messages.
  • Fixed the problem that LiveShell PRO does not accept commands to restart or to go offline when stopping live streaming while the device displays “Synchronizing Dashboard”.
  • Icons now immediately disappear when LiveShell PRO goes offline.
  • Added support for vertical crop 9:16 aspect ratio.
Firmware Rev.3832(2016.10.28)

Main Improvements

  • Fixed the problem that a higher value than set is displayed as frame rate in RTSP mode.
  • Fixed the problem that a false Wi-Fi profile “Wi-Fi#10” appears when deleting a registered Wi-Fi profile.
  • Fixed the problem that “DNS error” occurs when LiveShell PRO is offline in RTSP mode then immediately restarts live streaming.
  • Fixed the problem that in local mode an unexpected number is displayed.
  • Changed the wording of error message “unknown error”.
  • Fixed the problem that LiveShell PRO does not connect to Dashboard when name resolution fails.
Firmware Rev.3814(2016.06.10)

Main Improvements

  • Fixed the problem that an error occurs when using USB modem.
  • Added support for Huawei E3131s-2 USB modem (additional device-ID support).
  • Added support for Huawei E3251s-2 USB modem.
  • Changed default settings for live streaming.
  • Changed processes that LiveShell PRO executes when using USB modem.
Firmware Rev.3779(2016.03.17)

Main Improvements

  • Fixed the problem that in RTSP mode LiveShell PRO cannot broadcast normally
Firmware Rev.3774(2016.02.25)

Main Improvements

  • Fixes the problem that LiveShell PRO cannot connect to some 5GHz Wi-Fi AP.
Firmware Rev.3769(2016.01.27)

Main Improvements

  • Fixed the problem in RTSP mode that audio settings do not update until livestreamimg stops.
  • Added support for 4G LTE/USB adapter (LG L-3D, Huawei E3131s-2).
  • Added support for Wi-Fi/USB adapter (CDP-WF02A with 2.4GHz and 5GHz support).
Firmware Rev.3737 (2015.11.18)
Main Improvements
  • Added properties(audioonly, videoonly, avcprofile, avclevel and aacoat) to onMetaData Object of RTMP live streaming.
  • Added a menu to show Wi-Fi MAC address.
  • Added changes to make timestamps, including AVC/AAC sequence headers, always increase.
Firmware Rev.3663 (2015.5.15)
Main Improvements
  • Fixed the problem that the following menu Broadcasting becomes English even if the language set to Japanese.
Firmware Rev.3662 (2015.2.5)
Main Improvements
  • Fixed the problem that can not connect some kind of WiFi AP.
Firmware Rev.3660 (2015.1.6)
Main Improvements
  • Fixed the problem that can not find some kind of SSID.
Firmware Rev.3637 (2014.10.10)
Main Improvements
  • Fixed the problem that can not connect some WiFi AP.
Firmware Rev.3636 (2014.10.9)
Main Improvements
  • Fixed the problem that the frame rate does not increase thereafter if FPS is set 0 when it is set to a variable frame rate.
Firmware Rev.3624 (2014.5.15)
Main Improvements
  • Fixed the problem that video biterate was kept low continuously in the local mode.
  • Fixed the problem that the fine shift occurs to the time stamp on the RTMP delivery time.
  • Modified to perform automatically restart the abend
Firmware Rev.3592 (2014.2.25)
Main Improvements
  • Fixed an issue in which can fail to recognize the HDMI input when it was turned on the power.
Firmware Rev.3518 (2013.8.20)
Main Improvements
  • Improved the problem that the key input of the LiveShell PRO becomes ineffective.
Firmware Rev.3514 (2013.7.18)
Main Improvements
  • Changed Dashboard API access to HTTPS for security issues.
  • Fixed a problem where the device could not detect a disconnect cable when used with a fixed IP and Ethernet (not WiFi).
  • Fixed a problem where the device could not broadcast the initial time when it had been changed from the RTSP server mode to the RTMP mode.
Firmware Rev.3495 (2013.4.8)
Main Improvements
  • Support RTSP server function.(Support act as Wirecast IP camera source for AXIS M1104)
  • Fixed a problem where the wrong color  was entered for YUV and RGB.
Firmware Rev.3484 (2013.3.13)
Main Improvements
  • Fix the problem stating that the Audio display adjustment is broken.
Firmware Rev.3483 (2013.3.8)
Main Improvements
  • Supported RTMP authentication of LimeLight and Akamai.
  • Fixed a problem that reconnected when LiveShell was on high load.
Firmware Rev.3480 (2013.1.23)
Main Improvements
  • Fixed a problem where the device repeatedly disconnected and reconnected every 16.777 second in other RTMP service.
  • Fixed a problem where there was a a delay in reconnecting.
  • Support LimeLight RTMP Authentication.
  • Fixed a problem where the status does not allow a custom mode even if mono / statements of the audio from the Dashboard are set to custom, and the setting reverts when it goes offiline.
  • Support monitor output in paused.
Firmware Rev.3457 (2012.12.6)
Main Improvements
  • Fixed a problem where the aspect of AV-IN can not be changed if manual crop setting in HDMI is set.
  • Fixed a problem where the last image is kept to output in monitor output when you stop livestreaming.
  • Support change mode of monitor output NTSC or PAL.
  • Improve the stability of the wireless LAN connection